PDA

View Full Version : New privacy screen - where to get posts from



theconcierge
22nd Jun 2012, 04:43 PM
Hi all

I haven't posted here in ages.

I am going to attempt to build some new privacy screens along one of my fences so that we don't have to look straight into the neighbours place. I believe we want to put horizontal treated pine (painted) slats about 600 higher than the fence.

Just wondering if Gal posts concreted into the ground are my best bet ( fence is 1.8m so add 600 height, than would eave be 600 in the ground )? Ay idea where the best place to buy them from would be ( going to need a few).

Also, is 900 the maximum recommend span for treated pine for a screen?

any advice woud be great

stevoh741
22nd Jun 2012, 05:38 PM
Any steel supplier/fabricator will have it (much cheaper than any cut to length stuff sold in hardware or fencing supplies.) Look up yellow pages or similar

theconcierge
24th Jun 2012, 07:53 PM
Cheers

Checked out metal mart today and they were a lot cheaper than Bunnings - thanks for that.

Another question - can you paint Gal posts?

stevoh741
24th Jun 2012, 09:04 PM
yes. I'd use a good primer like that red oxide one first, sticks like chit to a boot.