View Full Version : Filler for Blueboard?
21st Nov 2008, 02:38 PM
Whats the best brand/type of filler/putty to use on blue board joints?
21st Nov 2008, 03:10 PM
21st Nov 2008, 04:18 PM
I wanna know what experience people have had, they'll try and sell you anything on some sites
21st Nov 2008, 04:38 PM
How much have you got to do? And are you going to paint or render the Blueboard afterwards?
I only had a 7 meter wall area to do so just used a bag of BlueBoard Jointing compound from Bunnings. It is pricey - $50 or thereabouts for a 20kg bag from memory.
From previous experience the joints stand out like the proverbial when they dry and are difficult to feather in to a later render or textured finish. To overcome this I taped them and used the joint compound to fill the joints and smeared it on as a thin render all at the same time. As it is all in one application the joint is not discernable.
21st Nov 2008, 06:08 PM
thats one happy wet buddha there.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
Content Relevant URLs by vBSEO