Dents on the wall - Help

[sacha1390]

Well its only a plasterboard so what will I need(materials) to fix it??
Thanks.

[seriph1]

actually, all you need to do is go to Mitre 10 or Home Hardware or a Plaster Supplier and ask

:D:D:D

Seriously, the bits you'll need are few, but be prepared to make a bit of a mess until you know what you're doing .... I have done this a few times and it gets easier after a while

BTW what suburb are you in? There are a number of great plasterer's supply companies in the northern suburbs.

[Honorary Bloke]

Well its only a plasterboard so what will I need(materials) to fix it??
Thanks.

A filler putty, a putty knife to spread it, some sandpaper, and a bit of touch-up paint. All readily available at Bunnies. If the "dents" are actually holes, you may need a bit of mesh backing as well.

[Rod Dyson]

I would go to the new subdivisions armed with 1/2 doz stubbies adn find where a plasterer is working and ask for some cornice adhesive and some topcoat. They will scoff the stubbies and give you all you need.

Bunnings a very expensive for plaster products. If you are near Bundoora or Glen Iris I will give you what you need and you wont need to bring the stubbies!

I will be in Glen Iris until Wed.

Then in Thomastown.

Email me or PM me to arrange. Or my phone number is on my web site.

Cheers Rod

[leeton]

Geez you're a good bloke Rod...always plenty of advice and always ready to help some-one out. Good onya.:2tsup:

[Rod Dyson]

When I can leeton.

Unfortunatly its not always possible.

Thanks