Results 1 to 8 of 8

Thread: Venting to Cieling

  1. #1
    2x4's Avatar
    2x4
    2x4 is offline Senior Member
    Join Date
    Sep 2008
    Location
    queensland
    Posts
    207

    Default Venting to Cieling

    We are relocating our washing machine and dryer into a cupboard.

    In the cieling of the cupboard I will put in an exhaust fan. The doors are louvered. Will it be OK to vent straight into the cieling. There is a whirly bird about a metre away.

    Any Ideas?
    I might be rough.....but at least I'm expensive

  2. #2
    intertd6 is offline 1K Club Member
    Join Date
    Nov 2008
    Location
    nsw
    Posts
    1,042

    Default

    Best to vent it to the eaves or external wall if possible as the warm moisture laden air will condensate when coming in contact with cold surfaces, there is something about this in the BCA I seem to remember
    Regards inter

  3. #3
    arms's Avatar
    arms is offline Golden Member
    Join Date
    Jul 2004
    Location
    ipswich Queensland (Gods backyard)
    Age
    58
    Posts
    856

    Default

    vent it into the ceiling cavity but place a section of expanding duct over the hole and attach the other end to a roof truss or similar and point the end directly at the whirly bird ,
    kind regards
    tom armstrong
    www.kitcheninabox.com.au
    Flat Packed kitchens to the world

  4. #4
    2x4's Avatar
    2x4
    2x4 is offline Senior Member
    Join Date
    Sep 2008
    Location
    queensland
    Posts
    207

    Default

    Cheers guys.....I'll try Tom's method. I am all for the easy way out.

    .
    I might be rough.....but at least I'm expensive

  5. #5
    jatt's Avatar
    jatt is offline house trasher
    Join Date
    Aug 2008
    Location
    Bendigo
    Age
    40
    Posts
    208

    Default

    Obviously good ventillation, especially in an enclosed space, is important.

    Once your dryer packs it in I would look into getting a unit with an in built condensation collector. The missus invested in one (no vested interests in company) and the amount of condensation in the laundry decresed dramactically. Simply empty out the container after a drying cycle.

    Hers is a Bosch, but I am sure there are also other companies out there who make the same kind of thing.
    When I die, bury me in the hardware store

  6. #6
    intertd6 is offline 1K Club Member
    Join Date
    Nov 2008
    Location
    nsw
    Posts
    1,042

    Default

    The easy way out here will cause you problems, the amount of moisture in a drier discharge hitting a cold metal tube of a ventilator on a cold night, will drip water onto you ceiling causing stains at least & maybe a new paint job.
    regards inter

  7. #7
    GraemeCook's Avatar
    GraemeCook is offline Golden Member
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    719

    Default

    Quote Originally Posted by 2x4 View Post
    We are relocating our washing machine and dryer into a cupboard.

    In the cieling of the cupboard I will put in an exhaust fan. The doors are louvered. Will it be OK to vent straight into the cieling. There is a whirly bird about a metre away.

    Any Ideas?

    I think that this is a very risky option. In the short run you will be putting a lot of moisture into the ceiling space which will cause mold, especially in a humid climate. In the longer term, all that lint being pumped into the ceiling space will create a significant fire hazzard.

    May I suggest that you run your vent pipes through your roof space and then out through the eaves. This is easier than venting through the roof.

    Cheers

    Graeme

  8. #8
    2x4's Avatar
    2x4
    2x4 is offline Senior Member
    Join Date
    Sep 2008
    Location
    queensland
    Posts
    207

    Default

    OK..OK.. You have sold me on the venting to the eaves thing. Will prolly do it this weekend after eating some Lamb.

    I guess Bunnings is the one stop shop for this?

    Cheers.
    I might be rough.....but at least I'm expensive

Similar Threads

  1. exterior cieling
    By 2x4 in forum PLASTERING
    Replies: 3
    Last Post: 9th Sep 2008, 08:35 PM
  2. Roof timber and venting
    By LordBug in forum STRUCTURAL RENOVATION
    Replies: 3
    Last Post: 12th Aug 2008, 02:53 PM
  3. securing window venting..
    By montiee in forum PLUMBING
    Replies: 3
    Last Post: 18th Jan 2008, 12:35 AM
  4. Installing Additional Venting
    By damien in forum BRICKWORK
    Replies: 16
    Last Post: 15th Dec 2007, 10:22 PM
  5. Soil pipe venting problem
    By Sydneysider01 in forum PLUMBING
    Replies: 5
    Last Post: 4th Apr 2006, 10:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •