Bunnings? Might need some more detail.
https://www.bunnings.com.au/metal-ma...strip_p1079284
Hi guys would anyone know where i can get a t type edging to put between 2 pieces of melamine boards.
thanks![]()
Bunnings? Might need some more detail.
https://www.bunnings.com.au/metal-ma...strip_p1079284
That would be perfect if it was white but I could get it powder coated. If I can't find anything I will go with this.
Paint ?
I am building a wardrobe and have put melamine boards on the wall as backing and have a join and I want to just neaten it up.
Not as a joiner, but as a join cover I have used these mouldings by removing the back part, leaving a spline. I then just silicone it in place between the two boards: https://www.bunnings.com.au/brutus-6...ision_p1100630
Maybe the same is available for 16mm board!? (can get 13mm for plasterboard)
That would be my answer to for simplicity and convenience
why not just Iron on some white crappy Hmr/chipboard edging @ 30cents/meter or whatever it costs by the roll or remainder of roll from cunnings.
surely cheap if you lay it on a straight edge or a line over the seam ?
it covers large screw holes and all sorts of sins.
![]()