Hire the best Landscaper

waterproofing block wall

Results 1 to 8 of 8
  1. #1
    Apprentice (new member)
    Join Date
    May 2010
    Location
    dapto
    Posts
    1

    Default waterproofing block wall

    has anyone heard of bidima48,it's used for waterproofing block wall's.
    Any idea on how to water proof a block retaining wall, ?

  2. #2
    3K Club Member
    Join Date
    Jun 2010
    Location
    Qld
    Posts
    3,278

    Default

    When waterproofing walls you need to ensure the water that is prevented from going through the wall has somewhere to go.

    This means installing a drain, best done just below the top of the footings and falling away to both ends for good drainage.

    The other thing to look for is that the not only the wall, but also the wall to footing interface is treated, this prevents water getting under the wall.

    Do you plan to do the waterproofing yourself?

    .
    Growing old is compulsory, growing up is not.
    http://www.wet-seal.com.au/waterproofing/locations.html

  3. #3
    Golden Member
    Join Date
    Jun 2005
    Location
    Sunny Shine Coast
    Age
    76
    Posts
    608

    Default

    Are you doing the water side (positive pressure) or the 'dry' side (negative pressure). ?

    I am about to re seal our concrete block water tank and have been told this is the stuff to use - can be applied from the outside.

    SILASEC
    David L
    "A dedicated amateur will always do a better job than a slap dash professional"

  4. #4
    Senior Member
    Join Date
    Jan 2011
    Location
    Adelaide
    Posts
    132

    Default

    I agree with what has previously been said above, prevention is better than any cure. Check out the Gripset web site. They have some good products that can be used on the positive or negative side. Different products both sides www.gripset.com

  5. #5
    1K Club Member jago's Avatar
    Join Date
    Apr 2010
    Location
    ....
    Posts
    1,411

    Default

    do you mean Bidim? If so thats a geotextile to put across the fill part Continous Filament Geotextiles, Staple Fibre Geotextiles, Woven Geotextile, Nonwoven Geotextiles, Geotextile yu can get it at Landscaping centres.

    Depends on what the engineer has specified I would be looking to


    • Tank the wall in Gripset or similar
    • Fibro sheet hard up against the wall to stop punctures of tanked wall
    • Vertical drain, like this Walldrain Panel Wrimco Waterproofing Co -
    • Agg pipe connected to vertical drain
    • then bidim against the earth and then back fill with something that will not hold water
    • also a dish drain may be required.

  6. #6
    Senior Member
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    126

    Default

    Is it possible to just use plastic sheeting to waterproof a block wall (probably the black builder's moisture membrane)? Please correct me if I'm wrong, can we really properly waterproof dry stack walls (ie. no cement/grout/glue between the blocks) with a paint-on waterproofing compound - I would think that these dry walls would be subjected to some minor movement which could break a paint-on waterproofing membrane?? Or is this totally wrong ....

    Also, why is it needed to waterproof a block wall - would it prevent the blocks from getting all grey and stained in a few years time? Is the discolouration and staining simply due to moisture behind the wall? Can those stained blocks ever be cleaned from those stains?? Thanks

  7. #7
    Senior Member
    Join Date
    Jan 2011
    Location
    Adelaide
    Posts
    132

    Default

    Hold on, are we talking a dry stack wall or a properly construction block wall with mortar joints and a concrete footing? The rules change quite considerably. A dry stack wall will move but a agg drain behind the wall will at least remove some of the moisture, the rest will permiate through the wall.

  8. #8
    Old Chippy 6K
    Join Date
    Mar 2007
    Location
    Canberra
    Age
    71
    Posts
    6,582

    Default


    If it is lock together mortarless retaining wall then paint-ons won't do the job. In both cases as mentioned above - whatever you do the water has to be moved away because you are effectively turning the wall into a dam (Otherwise part of the design would have weep holes/ pipes at various places to allow the water to pass through the wall). That means designing and building with that in mind from the bottom up. So ag pipe, proper drainage slopes aggregate geo-fabric and so on. Builders plastic can be part of that design & build too care not to create a tear in it at any stage of course.
    Advice from me on this forum is general and for guidance based on information given by the member posing the question. Not to be used in place of professional advice from people appropriately qualified in the relevant field. All structural work must be approved and constructed to the BCA or other relevant standards by suitably licensed persons. The person doing the work and reading my advice accepts responsibility for ensuring the work done accords with the applicable law.

Similar Threads

  1. Block wall to paving
    By frankgue in forum Brickwork
    Replies: 1
    Last Post: 3rd Dec 2010, 11:57 PM
  2. Block Retaining Wall - what to use for waterproofing?
    By scoobysteve in forum Brickwork
    Replies: 9
    Last Post: 15th Aug 2009, 01:20 PM
  3. Waterproofing gap between bath and wall
    By davidbee in forum Bathrooms
    Replies: 1
    Last Post: 6th Jul 2009, 04:40 PM
  4. What's the going rate to lay a block wall?
    By lukelegend in forum Brickwork
    Replies: 5
    Last Post: 29th Apr 2009, 05:16 PM
  5. Block wall assistance
    By transparu in forum Brickwork
    Replies: 4
    Last Post: 9th Apr 2009, 11:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •