Bros

Now that's a worry.

15,000 klm is a bit much for Cat6

You are correct as complacency has taken over here. Now with the fast acting vaccines freely available there shouldn't be the attitude that they scared people into getting the second AZ vaccine before it was due, I hope those who did will not suffer any consequences.

Cant speak for Andrews bur Palaszczuk and McGowan have certainly demonstrated their stand has been popular by the electors. Add NSW to that list as the public hospital system has been staved for funding Australia wide for years. I'm happy as it is and I'm not alone.

No minimum except those below 75mm have to be installed so there is no ingress of dust or water. I think below 100mm is ridiculous as it makes then subject to impact from a vacuum, broom or mop and if you use plug packs some of them hang below the outlet.

Hard to believe you were lost for words.

And I suppose you were there making small talk with Gerry Harvey?

Getting back to the corona virus, my son has been against this vaccine as it has been rushed on to the market but yesterday he was talking to us and now seems to be accepting that if you are vaccinated you will be in this group and non vaccinated you will have to stand at the back.

Nope

Fitted out a 10m boat hull, you could forget the level and square.

I know it is estate agent talk but even if there is a grain of truth I find it hard to understand people motivation. I lived in a small town where the pay was exceptionally good and I have seen people come from Brisbane and within 3 yrs most have them have gone back sacrificing the high income as the wife couldn't cope with living in a smaller town. Now Townsville and Bundaberg are not small towns but they are don't compare with Sydney and Melbourne for convenience. The country seems to...

Not into all that new fangled technology stuff, I have my roots in the steam age.

Does it matter, just how this bloke remembers it as it appears there is no standard just your standard and his standard both different but achieve the same result.

A for America?

Before you cut it thread on of these nuts on as it will make it easier as it will reform the distorted cut thread as it is removed, saves a bit of work if the cut isn't exactly perfect. https://www.bunnings.com.au/kinetic-20mm-brass-threaded-back-nut_p4700216

Interesting answer, I was working with a cabler a while back terminating a heap of sockets and asked him what he uses A or B and he said he just uses A for Australia.

Then there is Cat 6 with the choice of A or B

Specsavers anyone.

Fortunately or unfortunately that is the way it is now with instant communication. It has the advantage of taking some of the mystery out of "doctor knows best". I was just looking at a FB post tonight and some of the vitriol being dished out by posters who say they believe in vaccination won't be vaccinated for Covid was incredible. I had to wonder if these posters were just trolls who have been vaccinated and just stirring up others just for their satisfaction. Then there are the...

I have had a different experience. I was installing solar and one bloke quoted from Google earth and never came to the job, another gave me a quote and I wanted some changes and I never heard back and another who was recommended to me but never advertised came walked over the roof with a tape and told me all the panels I wanted would not fit in the best place Nth so he suggested breaking up the panel orientation. He sent me a detailed quote with three recommendations of panels and inverter....

You seem to have never watched you own video's so could you explain the differences from 43:21 onwards?

The other missing part is where is the heater situated, is it in the pump or in a separate tank? A photo looking down from the top would be handy

I heard that to but not what vaccine it was that the 33% that were in hospital had.

I doubt they will release that information nor the type of vaccine vs hospitalization or death. If they did it will show the best vs the rest of the vaccine's.

Only a small yard on a 700sm block, I've let the lawn go for some years and this year I installed a sprinkler system and got a corer to punch holes in the grass then fertilizer and top dressed the low spots and the sprinkler trench. I used about a cu m of sandy loam.