Uncle Bob

How's the river Marc?

Looks like it needs more cornice cement and paint.

Yeah you're right. On second look it is just galv or zincalume. The first photo it looked a bit transparent. Anyway, like I said, access will still require a sheet or two being removed I reckon.

Yip. There's even been one done the other way :-) Jump to 23:53 for lift off

Since you're painting it, you can use a filler to hide any bad joints.

Going forward there will be a lot of ICE to electric conversions.

Ohh, that's a really good point!

Try soaking the buildup with vinegar.

I can't see why not. I'm not an electrician tho. I think the thing you are looking for is a changeover switch. Maybe you should be asking a off grid installer, they do this stuff all the time. BTW, Phild will be along shortly to ask you to change your listed location. State should be a minimum.

With the skyrocketing fuel prices, the oil companies are shooting themselves in the foot and forcing people to look at electric cars. Maybe big oil is just having their last hurray (I bloody hope so).

I think the issue isn't what to use to fill the gap, but more like how to get to the gap as it really needs to be gotton to from the outside. You may need to see if you can get a sheet of the Laserlight off to get to it. I'd use a slat of timber in there, or a sheetmetal flashing.

That isn't too bad. As a side note, my 6KW Fujitsu has been going pretty well since I've had the place which is 13 years. It looked old when we moved in too. I'm worried about when it karks it that it will a couple of grand or more to replace it.

A photo from the other side may help.

Those are called "blocks" on a boat or pulleys everywhere else.

Maybe the site owners website could help? https://www.oneflare.com.au https://www.oneflare.com.au/air-conditioning

I wonder if Bob is still running on Hydrogen.

Surely there's gotta be some cereal munchers to save the day? :D

30 metres of pipe is a long way. If it has to be replaced too, then that's going to be expensive I'd imagine.