wozzzzza

ive only used it with concrete mix or as a primer for various things. never though of it as a glue as such, always used tile glue after surface is primed with it. no idea.

probably want to prime the 2 surfaces first wouldnt you with something like bndcrete??

done it on one stack. this all look good?

darn. i plan a tundish if it was possible.

glue them.

hmmm, ok, i have some of that somewhere i will give it a go.

yeah its an old building around late 70's any of the pipes i will aim at, they all goto the same connection at the bottom. was thinking do i need an S bend water trap in there or something then the 3 x 20mm pipes run into the top of that with airgap yes it will give out a fair bit of water up here in summer, water will be running out not just dripping out.

for pest/termite prevention, the slab of the building should not be covered up by concrete else termites/ants can work their way in unnoticed and do a lot of damage. any pathways etc.. should not be higher than the building slab.

internally and summer, as we dont get winter in cairns. shipping container is air-conditioned internally.

all valid ideas yes. but what one to go with.

i just use the edge of a scraper, normally not too hard to remove the glue