Search:

In that area, try "A touch of Glass"

Ph:96622910


Fax: 96622916 ...

What suburb are you in Jo ?
Supply only or supply and fix ?

I only have experience in NSW but don't imagine it to be different
Council will not ask for a Certificate of compliance they will inspect it but a private certifier will . If you DIY he will then...

a) You were not just " keeping an eye on your (sic) post" you were whining that after a day no one had replied.
b) Profanity? I concede the term I used was not appropriate on a public forum and if...

http://crlaurence.com.au/ProductPages/showLine.asp?GroupID=28364&Path=::39326::28294::28364
http://crlaurence.com.au/ProductPages/showLine.asp?GroupID=28365&Path=::39326::28294::28365
...

You can do it that way but it is generally not a good idea.
There are a lot of products on the market to retro fit shelves etc .
You have glass quads you can just silicon into corners, brackets to...

Maybe your just a nicer person than me Ashore!

:U

Brett Thompson

I would not have given the rude pr*ck the time of day
We do screens in glass and ally often

Nova Bathrooms 9576 5536 Kirrawee

(No affiliation)

Oh I see...
Yes Unfortunately Tools that is 99.5% the case , its often not repairable to a satisfactory level. Its not a surface thing , its burnt in , you cant get rid of it but sometimes the...

Give me a ring Gam on 9521 8787 during office hours , I got mine off CR Lawrence PTY LTD , but dont expect to be able to get much out with it , if you can post some pics it may help.

Brett

Core drilling into the slab is the best way. Bar none.

90mm in is OK, thats 90mm of embedment not just drilling 90mm ,if you do drill through dont panic but do put a bit of tile or something in...

Your right Tools but the damage is usually not direct contact with the grinder itself , rather the sparks from grinding hitting the sheet.
A lot can be removed , depending on how close the sparks...

80mm cover is 12.5m per meter square plus waste

Oh dear, yes sounds like an angle grinder. A razor will take a lot of but not all if it as it will be melted in . When using a razor a bit of WD 40 with it will help.
Scrape in one direction and...

The channel will be a better solution on the wall.



Sydney based sorry



Silicon it on top of bath.

Didn't see your query hope this is not too late.
In your area Mega Stone Aluminium will have 40x3 in 4.0m lengths at about 10.00 a length at Revesby / Condel Park 9708 2528

Powder Coating try...

Your memory is spot on

For a quality finsh sandblasting will give you the best result. Most sand blasters will not be able to give you a quote over the phone rather they will quote an hourly rate. Anything you do prior...

Be very careful,
8 strands gives you 9 gaps , assuming a 50mm top rail and an initial balustrade height of 1000mm your gaps are 105mm.
This does not comply to the BCA. But its OK if your deck is...

A $1000.00 for 3.2mm wire is ridiculous
Need to know a few things though ,
Span between posts? ....hopefully under 1500mm
Difference in finished floor level to ground level?.... if its over 4.0m...

No

My vote is Baltic over Cypress, just too clear

Whilst its been a while since I been involved in flooring, yes you can on a slab. You have three options that I'm familiar with.
1) You can glue parquetry directly to the slab. Will increase floor...

I'm assuming its an aluminium door and window Biko?
A not too aggressive cutting compound like Kitten #2 will bring it back but be warned it is hard to clean up as the polish is hard to get out of...

Any realistic quote will require a site visit . Nova Bathrooms at Kirrawee do a high quality bathroom renovation and may be able to help you 9576 55 36 (I have no affiliation with them).
If you...

I will add,Most screens you see have these wall brackets (Or similar) :

http://www.crlaurence.com.au/ProductPages/showLine.asp?GroupID=10662&Path=::8121::9401::10662

As in all building work...

No bother happy I can help.

Have a look here :

http://www.crlaurence.com.au/ProductPages/S/SDCD1212A_30199.html?Origin=

Same sort of idea we often use CRL as all their products are high...

Yes there are,
We often use a bright anodized channel 18x18x2mm (for 10mm) fixed to the wall in which we silicon in shower panels. A panel installed in this way will easily hold a 500-600mm 10mm...

I thought I should have known allowances for tread out of level.
Upon looking it up I can confirm Peter it is 1:50 for landings (3.9.1.3.h.iii.).
But no where the trueness of a tread is mentioned,...

At what stage is your mezzanine?
Can you raise your floor level easily or economically to accommodate the steel staircase?
As mentioned above 44mm does represent a substantial trip hazard.

It is not.



That does not even make sense

Yes, in this case it is measured as the difference in height from the top of one tread to the next.

Yes, a daylight in excess of 125mm from top of tread to underside of next tread is illegal. If you have say a rising of 150mm , your tread will need to be in excess of 25mm finished thickness.
...