This could be your problem. Not forgiving. Try low sheen.
Type: Posts; User: blute
This could be your problem. Not forgiving. Try low sheen.
Scrape off excess and try Krud Kutter products avail. at Masters.
I would apply in order from left to right:
95671
The primer (slow drying) will penetrate the timber and give you a good base
The undercoat will even things out and sand up nice
The acrylic...
I suspect you saw rondo plater battens.
Buy Rondo Metal products in the Building Materials Mall
These aren't framing materials.
Aircell
This is fast and easy to install, especially if you have the floor up. Would definately recommend it. Have also used the concertina foil stuff but I much prefer the air cell for ease of...
Take a look at this how to scribe:
http://www.mitre10.com.au/media/pdf/title/M10773%20MitrePlan%20No.84%20Renew%20your%20architraves%20and%20%20skirting%20boards.pdf
Internal corners should be scribed not mitred.
Haven't used them yet, but are planning on using them for a job very soon:
http://www.modularconcretesleepers.com.au/
Remember:
2.3.4 Ground clearances
Install James Hardie external cladding with a minimum 150mm clearance
to the earth on the exterior of the building as shown in Figure 4 or in
accordance with...
Just got online to ask about the same thing. Im building a fence/screen around a pool.
I've set 75x75x4mm SHS steel posts at 600 centers to take the joins of the sheets running vertically. The...
Better hope they aren't porcelain tiles.
Can you just punch the nails in?
I have used the rondo furring channel before with the hangers for a suspended ceiling, was pretty good. Not sure what these brackets are that you are using? Are you talking the "betafix clips"?
Do...
Second Nordsjo Super Filler, good stuff!!
just out of interest, what are the skirtings made out of? I like the idea of pre painted anything.
Perhaps a hidden safe might be a better option.
:o replacing timber with aluminium.... NOOOOOOOOO!! :(
"In keeping" with your old house, Depending on the condition, please repair or replace them with timber.
Although I do like commercial...
as sportsfan suggested, have you considered using pine batons and spaghetting them onto the wall? If its as far out of square as your suggesting, this option allows you to rip the battens to correct...
At the time of the fall “the deceased” was wearing a crash helmet, however it came off in the fall.
Why was he wearing a crash helmet?? Was he planning the dive??
I have used home made ladder...